Welding Inspection and Certification

Welding Inspection and Certification

ITCo. can provide a comprehensive welder certification and welding procedure qualification program.

As part of this service offering, ITCo. will undertake the following:

Check correct welding procedure(s) employed.

Check welding procedure and welder qualifications.

Inspect weld profile preparation.

Inspect joint fit-up.
Check filler metals and consumable materials.
Check correct welding performance parameters observed.
Perform visual examination upon completion of welding.
Monitor pre and post weld heat treatment, where specified.

Ensure that all necessary visual inspection is completed and verify that all other necessary non-destructive examinations are executed in the specified manner for the method and coverage by appropriately qualified personnel.

Monitor the physical examination including non-destructive test, hydrostatic test, mechanical test etc. If needed.

Ensure that all necessary visual inspection is completed and verify that all other necessary non-destructive examinations are executed in the specified manner for the method and coverage by appropriately qualified personnel.

The welding inspector deployed at a site from ITCo. will be responsible for monitoring and verifying that the following functions of the work conform in all aspects to the specific requirements of the relevant code, specification and/or standard:

Welder Qualification Testing for performance qualification and certification of welders (a welder / welding operator performance qualification – WPQ) to ASME, ANSI, AWS, API codes.

Preparation of Welding Procedure Qualification as per client or project requirements.
Coupon testing as per Welding Procedure Qualification which includes visual examination, mechanical testing, metallographic examination and non destructive testing.
Documentation of the Procedure Qualification Record as per ASME, ANSI, AWS, API codes.

In depth weld inspection to include review of the applicable qualification e.g. welding procedure specification, welder performance qualification and validity for process materials and consumable items, equipment, set up and other factors, including certificates of calibration and/or conformity governing the work.

Check safety of set up and operation having due regard for self, welder and other workers in vicinity, particular in respect of ultraviolet radiation from arc during welding.

All ITCo. welding inspectors are generally certified in accordance with the requirements of at least one of the following schemes – Certification Scheme for Weld Inspection Personnel (CSWIP), American Welding Society (AWS) and/or ASNT Level II VT.

All our inspectors have the ability to interpret various standards including ASME B&PV Code, Section IX, API Std. 1104 and ANSI / AWS D1.1.

Need Welding Inspection and Certification Services ?

If you need this Service or need more informations please click on conact us button below

Contact Us